[Bacula-users] LTO-4 Drive issues
2010-05-24 14:06:59
After returning to my office this morning, I had found the server was connected
to a 10/100 switch. I had moved it to the rack and connected it to the switch
10/100/1000 and nic 1 pulls 1000 on ethtools
nic 2 pulls 100 on ethtools.
After futher investigation, it looks like nic 2 is capped at 100 mb/s.
Even running on 1 nic, my speeds have jumped up to a max of 8 Mb/s with an avg
of 3 - 4 Mb/s when doing backups over the net.
A little better but not where it should be.
I'm at a loss for the moment.
+----------------------------------------------------------------------
|This was sent by skipunk AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|