Bacula-users

Re: [Bacula-users] Set real size cartridge in bacula

2012-02-16 16:11:04
Subject: Re: [Bacula-users] Set real size cartridge in bacula
From: John Drescher <drescherjm AT gmail DOT com>
To: Darci Dambrós Junior <darci.listas AT gmail DOT com>, bacula-users <Bacula-users AT lists.sourceforge DOT net>
Date: Thu, 16 Feb 2012 08:56:11 -0500
2012/2/16 Darci Dambrós Junior <darci.listas AT gmail DOT com>:
>
> 2012/2/16 Alan Brown <ajb2 AT mssl.ucl.ac DOT uk>
>>
>>
>> how about btape? have you followed the instructions for testing things
>> using that?
>>
>
> I used the command btape for testing. Everything is ok, there was no error:
>
> btape-c bacula-sd.conf / dev/nst0
>     test
>
>
> In addition, do not know how btape can help since the error runs from the
> backup of data recorded on the 20GB cartridge.
>

Normally btape will let you do a full tape test. Ending at 20GB is a
problem.  How about filling the tape with tar or dd so you can rule
out bacula from the equation.

John

------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users