Looks like mine is /dev/sg2. Thanks for sharing that command.


[root@scrappy bacula]# cat /proc/scsi/sg/device_strs
ATA             WDC WD5000BEVT-0        01.0
IBM             ULTRIUM-TD4             97F0
DELL            PV-124T                 0075

-----Original Message-----
From: Richard Scobie [mailto:richard AT sauce.co DOT nz] 
Sent: Thursday, August 12, 2010 2:36 PM
To: Jeremiah D. Jester
Cc: John Drescher; bacula-users
Subject: Re: [Bacula-users] new bacula installation

Jeremiah D. Jester wrote:
> I'm confused. The tapeinfo output for /dev/sg1 says it is a 'Tape Drive' and 
> of type 'TD4' or LT04, the new supported capacity. Sg0 is the hard drive. I 
> get no output for devices sg3-sg10.  Please explain.

What is the output of:

cat /proc/scsi/sg/device_strs

On my sd machine with attached HP changer, I get:

ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD3202ABYS-0        02.0
ATA             WDC WD3202ABYS-0        02.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
HP              Ultrium 4-SCSI          B56W
HP              MSL G3 Series           4.70

This shows the changer component is /dev/sg11.

Regards,

Richard

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users