I'm confused. The tapeinfo output for /dev/sg1 says it is a 'Tape Drive' and of 
type 'TD4' or LT04, the new supported capacity. Sg0 is the hard drive. I get no 
output for devices sg3-sg10.  Please explain.

Thanks. 

[root@scrappy bacula]# tapeinfo -f /dev/sg1
Product Type: Tape Drive
Vendor ID: 'IBM     '
Product ID: 'ULTRIUM-TD4     '
Revision: '97F0'
Attached Changer: No
SerialNumber: '1310220895'
MinBlock:1
MaxBlock:16777215
SCSI ID: 0
SCSI LUN: 0
Ready: yes
BufferedMode: yes
Medium Type: 0x48
Density Code: 0x46
BlockSize: 0
DataCompEnabled: yes
DataCompCapable: yes
DataDeCompEnabled: yes
CompType: 0x1
DeCompType: 0x1
BOP: yes
Block Position: 0

-----Original Message-----
From: John Drescher [mailto:drescherjm AT gmail DOT com] 
Sent: Thursday, August 12, 2010 2:04 PM
To: Jeremiah D. Jester
Cc: bacula-users
Subject: Re: [Bacula-users] new bacula installation

On Thu, Aug 12, 2010 at 4:58 PM, Jeremiah D. Jester
<jjest AT u.washington DOT edu> wrote:
> John,
>
> You are correct. The device wasn't 'sg0' but rather 'sg1'. I made the change 
> in bacula-sd.conf, restarted daemons but still ran into the same problem. 
> Other ideas?
>
> [root@scrappy bacula]# tapeinfo -f /dev/sg1 | head -5
> Product Type: Tape Drive
> Vendor ID: 'IBM     '
> Product ID: 'ULTRIUM-TD4     '
> Revision: '97F0'
> Attached Changer: No
> ...
That is not it either. Here is an example from my autochanger


dev6 ~ # tapeinfo -f /dev/sg5
Product Type: Medium Changer
Vendor ID: 'EXABYTE '
Product ID: 'MAGNUM 224      '
Revision: 'C112'
Attached Changer: No
SerialNumber: '000089000435'
SCSI ID: 3
SCSI LUN: 1
Ready: yes

John

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users