On Thu, Aug 12, 2010 at 4:58 PM, Jeremiah D. Jester
<jjest AT u.washington DOT edu> wrote:
> John,
>
> You are correct. The device wasn't 'sg0' but rather 'sg1'. I made the change 
> in bacula-sd.conf, restarted daemons but still ran into the same problem. 
> Other ideas?
>
> [root@scrappy bacula]# tapeinfo -f /dev/sg1 | head -5
> Product Type: Tape Drive
> Vendor ID: 'IBM     '
> Product ID: 'ULTRIUM-TD4     '
> Revision: '97F0'
> Attached Changer: No
> ...
That is not it either. Here is an example from my autochanger


dev6 ~ # tapeinfo -f /dev/sg5
Product Type: Medium Changer
Vendor ID: 'EXABYTE '
Product ID: 'MAGNUM 224      '
Revision: 'C112'
Attached Changer: No
SerialNumber: '000089000435'
SCSI ID: 3
SCSI LUN: 1
Ready: yes

John

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users