On 12/08/10, Jeremiah D. Jester (jjest AT u.washington DOT edu) wrote:
> Also curious that I cannot mount a tape on /dev/nst0 even though nothing is 
> mounted.
...
> 3902 Cannot mount Volume on Storage Device "Drive1" (/dev/nst0) because:
> Requested Volume "" on "Drive1" (/dev/nst0) is not a Bacula labeled Volume, 
> because: ERR=block.c:1016 Read error on fd=5 at file:blk 0:0 on device 
> "Drive1" (/dev/nst0). ERR=Input/output error.

You haven't labelled the volume.

Try this:
http://www.bacula.org/manuals/en/install/install/Getting_Started_with_Bacula.html

Rory

-- 
Rory Campbell-Lange
rory AT campbell-lange DOT net

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users