Jeremiah D. Jester wrote:
> I'm confused. The tapeinfo output for /dev/sg1 says it is a 'Tape Drive' and 
> of type 'TD4' or LT04, the new supported capacity. Sg0 is the hard drive. I 
> get no output for devices sg3-sg10.  Please explain.

What is the output of:

cat /proc/scsi/sg/device_strs

On my sd machine with attached HP changer, I get:

ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD3202ABYS-0        02.0
ATA             WDC WD3202ABYS-0        02.0
ATA             WDC WD2002FYPS-0        04.0
ATA             WDC WD2002FYPS-0        04.0
HP              Ultrium 4-SCSI          B56W
HP              MSL G3 Series           4.70

This shows the changer component is /dev/sg11.

Regards,

Richard

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users