I’m setting up bacula on a new machine with a new Dell
LT04 autoloader. The device appears to be registering with linux (rhel 5.5).
All fd,sd and dir daemons are running.
[root@scrappy bacula]# dmesg
| grep "tape"
st 2:0:0:0: Attached scsi
tape st0
However I get a “no slots in changer” error when run ‘status
slots’.
*status slots
…
Connecting to Storage daemon
Tape at scrappy.microslu.washington.edu:9103 ...
3306 Issuing autochanger
"slots" command.
Device "DELL_124T"
has 0 slots.
No slots in changer to scan.
I also tried running ‘mtx’ manually. Any
thoughts?
[root@scrappy bacula]# mtx -f
/dev/sg0 status
mtx: Request Sense: Long
Report=yes
mtx: Request Sense: Valid
Residual=no
mtx: Request Sense: Error
Code=70 (Current)
mtx: Request Sense: Sense
Key=Illegal Request
mtx: Request Sense:
FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense:
Additional Sense Code = 20
mtx: Request Sense:
Additional Sense Qualifier = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in
CDB=no
mtx: Request Sense: SKSV=no
READ ELEMENT STATUS Command
Failed
Jeremiah Jester
Senior Informatics Specialist
UW Microbiology - Katze Lab
P: 206-732-6185