2010/8/12 Jeremiah D. Jester <jjest AT u.washington DOT edu>:
> I’m setting up bacula on a new machine with a new Dell LT04 autoloader. The
> device appears to be registering with linux (rhel 5.5). All fd,sd and dir
> daemons are running.
>
> [root@scrappy bacula]# dmesg | grep "tape"
>
> st 2:0:0:0: Attached scsi tape st0
>
> However I get a “no slots in changer” error when run ‘status slots’.
>
>
>
> *status slots
>
> …
>
> Connecting to Storage daemon Tape at scrappy.microslu.washington.edu:9103
> ...
>
> 3306 Issuing autochanger "slots" command.
>
> Device "DELL_124T" has 0 slots.
>
> No slots in changer to scan.
>
>
>
> I also tried running ‘mtx’ manually. Any thoughts?
>
/dev/sg0 is probably not the changer device.

tapeinfo /dev/sg0

John

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users