John BORIS wrote:
> I have a PowerVault 124T. Under RHEL 5. 
> Attached devices:
> Host: scsi0 Channel: 00 Id: 06 Lun: 00
>   Vendor: SUPER    Model: GEM318           Rev: 0   
>   Type:   Processor                        ANSI SCSI revision: 02
> Host: scsi0 Channel: 01 Id: 06 Lun: 00
>   Vendor: SUPER    Model: GEM318           Rev: 0   
>   Type:   Processor                        ANSI SCSI revision: 02
> Host: scsi0 Channel: 02 Id: 00 Lun: 00
>   Vendor: MegaRAID Model: LD0 RAID5 30505R Rev: 1L19
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> Host: scsi1 Channel: 00 Id: 02 Lun: 00
>   Vendor: SEAGATE  Model: DAT    9SP40-000 Rev: 911D
>   Type:   Sequential-Access                ANSI SCSI revision: 03
> Host: scsi2 Channel: 00 Id: 06 Lun: 00
>   Vendor: CERTANCE Model: ULTRIUM 2        Rev: 1826
>   Type:   Sequential-Access                ANSI SCSI revision: 03
> Host: scsi2 Channel: 00 Id: 06 Lun: 01
>   Vendor: DELL     Model: PV-124T          Rev: 0031
>   Type:   Medium Changer                   ANSI SCSI revision: 02
> 
> 
> The changer is at:
> /dev/sg5

oh.  Thank you.

# mtx -f /dev/sg5 status
mtx: Request Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Illegal Request
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 20
mtx: Request Sense: Additional Sense Qualifier = 00
mtx: Request Sense: Field in Error = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=yes
mtx: Request Sense: SKSV=yes
mtx: Request Sense: Field Pointer = 00 00
READ ELEMENT STATUS Command Failed

# tapeinfo -f /dev/sg5
Product Type: Tape Drive
Vendor ID: 'IBM     '
Product ID: 'ULTRIUM-TD3     '
Revision: '6B20'
Attached Changer: No
SerialNumber: '1210283915'
MinBlock:1
MaxBlock:16777215
SCSI ID: 6
SCSI LUN: 0
Ready: yes
BufferedMode: yes
Medium Type: 0x38
Density Code: 0x44
BlockSize: 0
DataCompEnabled: yes
DataCompCapable: yes
DataDeCompEnabled: yes
CompType: 0x1
DeCompType: 0x1
BOP: yes
Block Position: 0


> The tape drive on this changer is at:
> Data Node           /dev/st1  
> No Rewind Node      /dev/nst1
> 
> The tape drive and changer did work under Bacula when the system was
> running Fedora Core 3. Since I had to upgrade to RHEL 5 I have had
> issues getting Bacula running but that has been just me being dumb.
> 
> Hope this helps.

It does help.  Thank you.

> 
> 
> 
> John J. Boris, Sr.
> JEN-A-SyS Administrator
> Archdiocese of Philadelphia
> "Remember! That light at the end of the tunnel
> Just might be the headlight of an oncoming train!"
> 
>>>> ganiuszka <ganiuszka AT gmail DOT com> 1/19/2010 11:25 AM >>>
> 
> Here is a instruction about Dell PowerVault 124T and LUNs under Linux.
> 
> http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux
> 
> 
> Subject "Enabling LUN Support in Linux"
> 
> Maybe this is the solution.
> 
> Regards.
> Marcin


------------------------------------------------------------------------------
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field, creating opportunities for Conference
attendees to learn about information security's most important issues through
interactions with peers, luminaries and emerging and established companies.
http://p.sf.net/sfu/rsaconf-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users