On Wed, January 20, 2010 06:04, Dan Langille wrote:
[SNIP]
The prceeding shows *3* SCSI controllers: scsi0, scsi1, and scsi2.
The one you want is scsi2, which is an LSI 53C1030
<http://www.lsi.com/storage_home/products_home/standard_product_ics/scsi_ics/lsi53c1030/index.html>,
according to this:
> Fusion MPT base driver 3.12.19.00rh
> Copyright (c) 1999-2007 LSI Corporation
> Fusion MPT SAS Host driver 3.12.19.00rh
> Fusion MPT SPI Host driver 3.12.19.00rh
> ACPI: PCI Interrupt 0000:11:08.0[A] -> GSI 16 (level, low) -> IRQ 169
> mptbase: Initiating ioc0 bringup
> ioc0: 53C1030: Capabilities={Initiator,Target}
> scsi2 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=169
> Vendor: IBM Model: ULTRIUM-TD3 Rev: 6B20
> Type: Sequential-Access ANSI SCSI revision: 03
> Vendor: DELL Model: PV-124T Rev: 0043
> Type: Medium Changer ANSI SCSI revision: 02
> st: Version 20040403, fixed bufsize 32768, s/g segs 256
> Attached scsi tape st0 at scsi2, channel 0, id 6, lun 0
> st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA
> 4503599627370495
> Attached scsi generic sg0 at scsi0, channel 0, id 8, lun 0, type 13
> Attached scsi generic sg1 at scsi0, channel 2, id 0, lun 0, type 0
> Attached scsi generic sg2 at scsi1, channel 0, id 17, lun 0, type 13
> Attached scsi generic sg3 at scsi1, channel 2, id 0, lun 0, type 0
> Attached scsi generic sg4 at scsi1, channel 2, id 1, lun 0, type 0
> Attached scsi generic sg5 at scsi2, channel 0, id 6, lun 0, type 1
> Attached scsi generic sg6 at scsi2, channel 0, id 6, lun 1, type 8
[...]
> Fusion MPT misc device (ioctl) driver 3.12.19.00rh
> mptctl: Registered with Fusion MPT base driver
> mptctl: /dev/mptctl @ (major,minor=10,220)
> st0: Block limits 1 - 16777215 bytes.
[...]
> mptctl_gettargetinfo - buffer is full but more targets are available on
> ioc 0 numDevices=1
Hit the LSI site, and see what's what there - it may need a custom driver,
or a bit of a reconfiguration, or summat. The last bit about "more
targets are available" implies something is not configured.
Also, the tape is at id 6 lun 0, the changer is at id 6 lun 1, which means
the changer *should* be /dev/sg6... There's something niggling at the
back of my mind about having to do something with some devices control
file to enable the other LUN - but it won't come to the front.
Cheers,
Gary B-)
------------------------------------------------------------------------------
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field, creating opportunities for Conference
attendees to learn about information security's most important issues through
interactions with peers, luminaries and emerging and established companies.
http://p.sf.net/sfu/rsaconf-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
