Dan Langille wrote:
> Dan Langille wrote:
> 
>>I'm helping a client with a Linux system.  I see the tape drive, but 
>>cannot find the tape changer.  Clues please.
>>
>> From dmesg:
> 
> 
> Also:
> 
> Linux version 2.6.9-78.0.8.plus.c4smp (mockbuild AT builder10.centos DOT org) 
> (gcc version 3.4.6 20060404 (Red Hat 3.4.6-10)) #1 SMP Thu Nov 27 
> 19:19:34 EST 2008
> 
> And there is no /dev/changer*

/dev/sg6 should be it from what you have shown.

I have an HP attached here:

Host: scsi10 Channel: 00 Id: 04 Lun: 00
   Vendor: HP       Model: Ultrium 4-SCSI   Rev: B56W
   Type:   Sequential-Access                ANSI  SCSI revision: 05
Host: scsi10 Channel: 00 Id: 04 Lun: 01
   Vendor: HP       Model: MSL G3 Series    Rev: 4.70
   Type:   Medium Changer                   ANSI  SCSI revision: 05

ioc0: LSI53C1020A A1: Capabilities={Initiator,Target}
   alloc irq_desc for 37 on node -1
   alloc kstat_irqs on node -1
mptspi 0000:03:08.0: irq 37 for MSI/MSI-X
mptbase: ioc0: PCI-MSI enabled
scsi10 : ioc0: LSI53C1020A A1, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=37
ALSA sound/pci/hda/hda_intel.c:698: azx_get_response timeout, switching 
to polling mode: last cmd=0x002f0d00
scsi: waiting for bus probes to complete ...
scsi 10:0:4:0: Sequential-Access HP       Ultrium 4-SCSI   B56W PQ: 0 
ANSI: 5
scsi target10:0:4: Beginning Domain Validation
scsi target10:0:4: Ending Domain Validation
scsi target10:0:4: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI PCOMP (6.25 
ns, offset 64)
scsi 10:0:4:1: Medium Changer    HP       MSL G3 Series    4.70 PQ: 0 
ANSI: 5
scsi 10:0:4:0: Attached scsi generic sg10 type 1
scsi 10:0:4:1: Attached scsi generic sg11 type 8
SCSI Media Changer driver v0.25
ch0: type #1 (mt): 0x0+1 [medium transport]
ch0: type #2 (st): 0x3e9+24 [storage]
ch0: type #3 (ie): 0x0+0 [import/export]
ch0: type #4 (dt): 0x1+1 [data transfer]
st: Version 20081215, fixed bufsize 32768, s/g segs 256
ch0: dt 0x1: ID 4, LUN 0, name: HP       Ultrium 4-SCSI   B56W
ch0: INITIALIZE ELEMENT STATUS, may take some time ...

Drive is /dev/nst0 and changer is /dev/sg11.

Regards,

Richard


------------------------------------------------------------------------------
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field, creating opportunities for Conference
attendees to learn about information security's most important issues through
interactions with peers, luminaries and emerging and established companies.
http://p.sf.net/sfu/rsaconf-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users