Dan Langille wrote:

> Fusion MPT SPI Host driver 3.12.19.00rh
> ACPI: PCI Interrupt 0000:11:08.0[A] -> GSI 16 (level, low) -> IRQ 169
> mptbase: Initiating ioc0 bringup
> ioc0: 53C1030: Capabilities={Initiator,Target}
> scsi2 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=169
> Vendor: IBM Model: ULTRIUM-TD3 Rev: 6B20
> Type: Sequential-Access ANSI SCSI revision: 03
> Vendor: DELL Model: PV-124T Rev: 0043
> Type: Medium Changer ANSI SCSI revision: 02
> st: Version 20040403, fixed bufsize 32768, s/g segs 256
> Attached scsi tape st0 at scsi2, channel 0, id 6, lun 0

No, it's not attached to to a PERC, but it still could be a RAID controller.

The LSI 53C1030 is a dual channel Ultra 320 controller chip and as such 
cold be used as a straight controller, (my system is using an 53C1020 - 
single channel version without problem.

However, there are RAID controller products using the 53C1030:

<http://www.lsi.com/storage_home/products_home/internal_raid/megaraid_scsi/megaraid_scsi_3202x/index.html>

so you will need to check.

Regards,

Richard

------------------------------------------------------------------------------
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field, creating opportunities for Conference
attendees to learn about information security's most important issues through
interactions with peers, luminaries and emerging and established companies.
http://p.sf.net/sfu/rsaconf-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users