> Date: Wednesday, March 09, 2016 16:56:14 -0800
> From: maaf4d <bacula-forum AT backupcentral DOT com>

> 
> Ana,
> 
> I did change the IP address in bconsole and I still can't connect
> to it. I believe the previous reply to Wanderlei answers the other
> question. I also tried the command you suggested for testing the
> connection and it is not connection.

When you try to telnet from the backup server to port 9102 on the
client machine what type of response do you get? 

If you get a network "hang", then the issue is most likely a
firewall. If the machine is on the same network segment the  firewall
is probably on the target machine. If the machine is on a different
network segment the firewall could be at any router between the two
machines (but I'd start with the target machine). If you reach the
machine but it's not listening on 9102 you'll probably get a
"connection refused" response. You might also get a connection that
opens and then immediately closes, or some other permutation, which
generally indicates some type of configuration or access issue on the
target machine.

By the way, if the passwords you have been including in your
configuration outputs are the real ones, you should change them on
the machines in question, and be certain to not include them in your
posts ongoing.



------------------------------------------------------------------------------
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Acceleration Library.
Click to learn more.
http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users