[Bacula-users] Bacula setup driving me nuts
2011-08-23 09:58:43
Hi all,
I have a strange problem when i try to mount a tape.
First what i have i use centos 5.4 with bacula 5.0.3
Hardware is an IBM TS3100 (3573-TL) with 2 LTO5 (ULT3580-HH5)
config from bacula-sd.conf
Autochanger {
Name = Autochanger
Device = LTO5_1, LTO5_2
Changer Device = /dev/sg5
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
}
Device {
Name = LTO5_1
Drive Index = 0
Media Type = LTO5
Archive Device = /dev/st0
Autochanger = yes
Automatic Mount = yes
Always Open = yes
Removable Media = yes
Random Access = no
Requires Mount = no
Maximum Job Spool Size = 12G
Spool directory = "/var/spool"
Label Type = Bacula
Check Labels = yes
Label Media = no
}
Device {
Name = LTO5_2
Drive Index = 1
Media Type = LTO5
Archive Device = /dev/st1
Autochanger = yes
Automatic Mount = yes
Always Open = yes
Removable Media = yes
Random Access = no
Requires Mount = no
Maximum Job Spool Size = 12G
Spool directory = "/var/spool"
Label Type = Bacula
Check Labels = yes
LabelMedia = no
Config from bacula-dir.conf
Storage {
Name = AutoChanger
Password = host
Address = snlbck01.steltix.local
SDPort = 9103
Device = Autochanger
Media Type = LTO5
Autochanger = yes
Maximum Concurrent Jobs = 20
What happens if i want to mount a tape from console i do the following and get
the following.
*mount
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
The defined Storage resources are:
1: File
2: AutoChanger
Select Storage resource (1-2): 2
Connecting to Storage daemon AutoChanger at snlbck01.steltix.local:9103 ...
Enter autochanger drive[0]: 0
Enter autochanger slot: 5
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3304 Issuing autochanger "load slot 5, drive 0" command.
3992 Bad autochanger "load slot 5, drive 0": ERR=Child died from signal 15:
Termination.
Results=Program killed by Bacula (timeout)
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result is Slot 5.
3901 Unable to open device "LTO5_1" (/dev/st0): ERR=dev.c:491 Unable to open
device "LTO5_1" (/dev/st0): ERR=No medium found
Then i ask the Status and get the following
*status
Status available for:
1: Director
2: Storage
3: Client
4: All
Select daemon type for status (1-4): 2
The defined Storage resources are:
1: File
2: AutoChanger
Select Storage resource (1-2): 2
Connecting to Storage daemon AutoChanger at snlbck01.steltix.local:9103
snlbck01.steltix.local-sd Version: 5.0.3 (04 August 2010) i686-pc-linux-gnu
redhat
Daemon started 23-Aug-11 14:20. Jobs: run=0, running=0.
Heap: heap=135,168 smbytes=24,942 max_bytes=122,999 bufs=100 max_bufs=108
Sizes: boffset_t=8 size_t=4 int32_t=4 int64_t=8
Device status:
Autochanger "Autochanger" with devices:
"LTO5_1" (/dev/st0)
"LTO5_2" (/dev/st1)
Device "FileStorage" (/tmp) is not open.
Device "LTO5_1" (/dev/st0) is not open.
Slot 5 is loaded in drive 0.
Device "LTO5_2" (/dev/st1) is not open.
Drive 1 status unknown.
====
Used Volume status:
so the tape is loaded in the correct drive but not mounted. then i try another
mount
*mount
The defined Storage resources are:
1: File
2: AutoChanger
Select Storage resource (1-2): 2
Enter autochanger drive[0]: 0
Enter autochanger slot:
3901 Unable to open device "LTO5_1" (/dev/st0): ERR=dev.c:491 Unable to open
device "LTO5_1" (/dev/st0): ERR=No medium found
wont mount and then i do the following mount.
*mount
The defined Storage resources are:
1: File
2: AutoChanger
Select Storage resource (1-2): 2
Enter autochanger drive[0]: 1
Enter autochanger slot:
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3001 Mounted Volume: SCR02
3001 Device "LTO5_2" (/dev/st1) is already mounted with Volume "SCR02"
and the tape is mounted to LTO5_2 while it should LTO5_1
if ask for status it tells me this
Device status:
Autochanger "Autochanger" with devices:
"LTO5_1" (/dev/st0)
"LTO5_2" (/dev/st1)
Device "FileStorage" (/tmp) is not open.
Device "LTO5_1" (/dev/st0) is not open.
Slot 5 is loaded in drive 0.
Device "LTO5_2" (/dev/st1) is mounted with:
Volume: SCR02
Pool: *unknown*
Media type: LTO5
Drive 1 status unknown.
Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
Positioned at File=1 Block=0
====
Used Volume status:
SCR02 on device "LTO5_2" (/dev/st1)
Reader=0 writers=0 devres=0 volinuse=0
I am totaly lost i asked at first to mount on drive 0 LTO and ending up on
LTO5_2 it does this with jobs to when i manualy move the tape to drive1 the
jobs goes further
What could be wrong i dont know anymore
btw i am a newby with bacula so dont shoot me for asking stupid things i
googled and googled but couldnt find anything about it.
Regards Marcel
+----------------------------------------------------------------------
|This was sent by marcel.van.geresteijn AT steltix DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
------------------------------------------------------------------------------
Get a FREE DOWNLOAD! and learn more about uberSVN rich system,
user administration capabilities and model configuration. Take
the hassle out of deploying and managing Subversion and the
tools developers use with it. http://p.sf.net/sfu/wandisco-d2d-2
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Bacula-users] Bacula setup driving me nuts,
selanty <=
|
|
|