Re: [Bacula-users] Bacula setup driving me nuts
2011-08-23 17:27:14
> 3304 Issuing autochanger "load slot 5, drive 0" command.
> 3992 Bad autochanger "load slot 5, drive 0": ERR=Child died from signal 15:
> Termination.
> Results=Program killed by Bacula (timeout)
>
> have you tried to run /etc/bacula/mtx-changer with load command manually ?
>
> Yes i did i tried an mtx -f /dev/sg5 load and unload to both drives and that
> works oke
>
That is good now test the bacula
mtx-changer
script. You may have to modify this scrip to work with your changer.
On my system this script is in /usr/libexec/bacula/
John
------------------------------------------------------------------------------
EMC VNX: the world's simplest storage, starting under $10K
The only unified storage solution that offers unified management
Up to 160% more powerful than alternatives and 25% more efficient.
Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|