[Bacula-users] Bacula setup driving me nuts
2011-08-23 17:01:38
hi Pietro,
3304 Issuing autochanger "load slot 5, drive 0" command.
3992 Bad autochanger "load slot 5, drive 0": ERR=Child died from signal 15:
Termination.
Results=Program killed by Bacula (timeout)
have you tried to run /etc/bacula/mtx-changer with load command manually ?
Yes i did i tried an mtx -f /dev/sg5 load and unload to both drives and that
works oke
+----------------------------------------------------------------------
|This was sent by marcel.van.geresteijn AT steltix DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
------------------------------------------------------------------------------
EMC VNX: the world's simplest storage, starting under $10K
The only unified storage solution that offers unified management
Up to 160% more powerful than alternatives and 25% more efficient.
Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|