Hi,

2011/8/23 selanty <bacula-forum AT backupcentral DOT com>:
> hi Pietro,
>
> 3304 Issuing autochanger "load slot 5, drive 0" command.
> 3992 Bad autochanger "load slot 5, drive 0": ERR=Child died from signal 15: 
> Termination.
>  Results=Program killed by Bacula (timeout)
>
> have you tried to run /etc/bacula/mtx-changer with load command manually ?
>
> Yes i did i tried an mtx -f /dev/sg5 load and unload to both drives and that 
> works oke
>

I did not mean mtx command.
Bacula use an external program to interfacing with autoloader. This
command is defined by "Changer Command" directive.
I see in your logs that the changer command dies.
Your changer command is: /etc/bacula/mtx-changer %c %o %S %a %d

this configuration invoke /etc/bacula/mtx-changer /dev/sg5 load 5 /dev/st0 0
when bacula tries to load slot 5 of drive 0.

The script mtx-changer shoud not die, I think you must debug this..

sorry for my poor english..

Regards,Pietro

------------------------------------------------------------------------------
EMC VNX: the world's simplest storage, starting under $10K
The only unified storage solution that offers unified management 
Up to 160% more powerful than alternatives and 25% more efficient. 
Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users