On Mon, 29 May 2017 14:21:18 -0500
Les Mikesell <lesmikesell AT gmail DOT com> wrote:

Hi Les,

…
> to access the web interface.   A good starting point would be looking
> at point-to-point configurations of OpenVPN.    You'll need either a
> stable IP address for your home network or at least something that
> will work with a dynamic DNS service.
 
Yup, I forgot this one !

Also note that using WireGuard instead of OpenVPN can give you an
uncommon speed (that OVPN could just dream of):

=========== EXCERPT FROM WG ML (20170513)
Using the Infiniband network directly, iperf's performance is 21.7 Gbit/s
(iperf maxes out the CPU at the receiver, even when using 8 threads).

Hardware used:

- Xeon E5520 @2.27GHz (2 CPUs, 4 cores each)
- Mellanox ConnectX IB 4X QDR MT26428

Versions used:

- Debian jessie
- Linux 3.16.43-2
- Wireguard 0.0.20170421-2
- iperf 2.0.5
- Mellanox ConnectX InfiniBand driver v2.2-1
=========== /EXCERPT FROM WG ML (20170513)

JY

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki:    http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/