> Dick,
>
> What kind of tape drive do you have?
Good point!
I am using an Onstream ADR50 for this test and forgot about the problems
this drive has with amanda. I also have an Ecrix, which works fine, and
I was ultimately planning to use both tape drives and a disk file.
I didn't want to disrupt our normal backups, so I used the Onstream for
this test. It has known issues with amanda so I don't even think
"--with-broken-fsf" will help.
I will retry with the Ecrix.
I apologize for the false alarm.
Thanks,
Dick
> Try to configure amanda with '--with-broken-fsf'.
>
> Jean-Louis
>
> On Sat, Jun 07, 2003 at 12:40:27AM -0000, rwk AT americom DOT com wrote:
> > I got these errors when running amverify using:
> >
> > tapedev "rait:{file:/holdingdisk/backup,tape:/dev/nst1}"
> >
> > This is with snapshot:
> >
> > amanda-2.4.4-20030603.tar.gz
> >
> > Thanks,
> > Dick
> >
> > ------- Start of forwarded message -------
> > Date: Fri, 6 Jun 2003 09:22:27 -0600
> > From: Amanda user <amanda AT darth.americom DOT com>
> > To: amanda AT americom DOT com
> > Subject: AmeriCom AMANDA VERIFY REPORT FOR Full5
> >
> > Tapes: Full5
> > Errors found:
> > Full5 ():
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > Full5 ():
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > Full5 ():
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > Full5 ():
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > Full5 ():
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > Full5 ():
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> >
> > amverify Onstream
> > Fri Jun 6 07:53:22 MDT 2003
> >
> > Using device rait:{file:/holdingdisk/backup,tape:/dev/nst1}
> > Volume Full5, Date 20030605
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > Checked vulcan.internal.americom.com._boot.20030605.0
> > ** Error detected ()
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > ** Error detected ()
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > ** Error detected ()
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > ** Error detected ()
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > ** Error detected ()
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > ** Error detected ()
> > amrestore: 0: skipping start of tape: date 20030605 label Full5
> > amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> > Input/output error
> > ** No header
> > 0+0 in
> > 0+0 out
> > Too many errors.
> > ------- End of forwarded message -------
>
> --
> Jean-Louis Martineau email: martineau AT IRO.UMontreal DOT CA
> Departement IRO, Universite de Montreal
> C.P. 6128, Succ. CENTRE-VILLE Tel: (514) 343-6111 ext. 3529
> Montreal, Canada, H3C 3J7 Fax: (514) 343-5834
>
|