Dick,
What kind of tape drive do you have?
Try to configure amanda with '--with-broken-fsf'.
Jean-Louis
On Sat, Jun 07, 2003 at 12:40:27AM -0000, rwk AT americom DOT com wrote:
> I got these errors when running amverify using:
>
> tapedev "rait:{file:/holdingdisk/backup,tape:/dev/nst1}"
>
> This is with snapshot:
>
> amanda-2.4.4-20030603.tar.gz
>
> Thanks,
> Dick
>
> ------- Start of forwarded message -------
> Date: Fri, 6 Jun 2003 09:22:27 -0600
> From: Amanda user <amanda AT darth.americom DOT com>
> To: amanda AT americom DOT com
> Subject: AmeriCom AMANDA VERIFY REPORT FOR Full5
>
> Tapes: Full5
> Errors found:
> Full5 ():
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> Full5 ():
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> Full5 ():
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> Full5 ():
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> Full5 ():
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> Full5 ():
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
>
> amverify Onstream
> Fri Jun 6 07:53:22 MDT 2003
>
> Using device rait:{file:/holdingdisk/backup,tape:/dev/nst1}
> Volume Full5, Date 20030605
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> Checked vulcan.internal.americom.com._boot.20030605.0
> ** Error detected ()
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> ** Error detected ()
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> ** Error detected ()
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> ** Error detected ()
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> ** Error detected ()
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> ** Error detected ()
> amrestore: 0: skipping start of tape: date 20030605 label Full5
> amrestore: could not fsf rait:{file:/holdingdisk/backup,tape:/dev/nst1}:
> Input/output error
> ** No header
> 0+0 in
> 0+0 out
> Too many errors.
> ------- End of forwarded message -------
--
Jean-Louis Martineau email: martineau AT IRO.UMontreal DOT CA
Departement IRO, Universite de Montreal
C.P. 6128, Succ. CENTRE-VILLE Tel: (514) 343-6111 ext. 3529
Montreal, Canada, H3C 3J7 Fax: (514) 343-5834
|
