Hello Anna,

> I was not refering to the names for user and password. Instead, the
> directives "user" and "password" for Catalog definition. I noticed in
> your post that you defined Catalog using the keywords "dbuser" and
> "dbpassword", instead of using "user" and "password". Like bellow:
>
> Catalog {
>          Name = MyCatalog
>          dbname = "bacula"
>          dbuser = "bacula"
>          dbpassword = ""
> }

ah, thank you for pointing this. There are some wrong blogs on web ... 
Anyway, After some test this did not solve the problem - finally it 
where problems with right group and permissions. Further I had to add my 
FQN at /etc/hosts - something seems to be wrong at F22.

But two problems still resist:


$ bacula-tray-monitor -d99 -c /etc/bacula/tray-monitor.conf
tray-monitor: bsock.c:310-0 OK connected to server  Director daemon 
tux64.home.lan:9101.
tray-monitor: cram-md5.c:139-0 sending resp to challenge: 
Y8UyU8/FHw+i68UHd4JUuB
tray-monitor: cram-md5.c:67-0 send: auth cram-md5 challenge 
<466579471.1434046447@tray-monitor> ssl=0
tray-monitor: cram-md5.c:86-0 Authenticate OK w9kJdy/8Qy/Qt6/pf7+hLD
tray-monitor: authenticate.cpp:81-0 >dird: 1000 OK auth
tray-monitor: authenticate.cpp:88-0 <dird: 1000 OK: 1 bacula-tux64-dir 
Version: 7.0.5 (28 July 2014)
tray-monitor: bsock.c:310-0 OK connected to server  File daemon 
tux64.home.lan:9102.
tray-monitor: cram-md5.c:139-0 sending resp to challenge: 
+QpHgScKy9+uqmNV74+UXC
tray-monitor: cram-md5.c:67-0 send: auth cram-md5 challenge 
<1223422051.1434046447@tray-monitor> ssl=0
tray-monitor: cram-md5.c:86-0 Authenticate OK fj+lV9YEWzdUqFgeP/+v6B
tray-monitor: bsock.c:310-0 OK connected to server  Storage daemon 
tux64.home.lan:9103.
tray-monitor: cram-md5.c:124-0 Cannot scan received response to 
challenge: authenticate.c:86 Bad Hello command from Director at client: 
Hello Director bacula-tux64-mon calling

11-Jun 20:14 tray-monitor JobId 0: Fatal error: authenticate.cpp:126 
Director and Storage daemon passwords or names not the same.
Please see 
http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION00260000000000000000
 
for help.

$ sudo bat -d99
X Error: BadAccess (attempt to access private resource denied) 10
   Extension:    130 (MIT-SHM)
   Minor opcode: 1 (X_ShmAttach)
   Resource id:  0x3000004
X Error: BadShmSeg (invalid shared segment parameter) 128
   Extension:    130 (MIT-SHM)
   Minor opcode: 3 (X_ShmPutImage)
   Resource id:  0x30000fa
bat: bsock.c:310-0 OK connected to server  Director daemon 
tux64.home.lan:9101.
bat: cram-md5.c:139-0 sending resp to challenge: Ww+Xo3EtyD/uKC+LC8+6rA
bat: cram-md5.c:67-0 send: auth cram-md5 challenge 
<628826973.1434046684@bat> ssl=0
bat: cram-md5.c:86-0 Authenticate OK IW+T/R/05RcT4W+4R8+EhC
bat: bcomm/dircomm_auth.cpp:142-0 >dird: 1000 OK auth
bat: bcomm/dircomm_auth.cpp:152-0 <dird: 1000 OK: 1 bacula-tux64-dir 
Version: 7.0.5 (28 July 2014)
X Error: BadShmSeg (invalid shared segment parameter) 128
   Extension:    130 (MIT-SHM)
   Minor opcode: 3 (X_ShmPutImage)
   Resource id:  0x30000fa
....
and no widgets are drawn. Any hints? It this specific to Fedora22?

Thank you,
Olaf

------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users