Bacula-users

Re: [Bacula-users] Could not connect to server Director daemon ....

2015-06-27 03:40:36
Subject: Re: [Bacula-users] Could not connect to server Director daemon ....
From: olx69 <ope-linux AT gmx DOT de>
Date: Sat, 27 Jun 2015 09:38:12 +0200
Hello Ana,

> I´m not sure about this, but I noticed something about the names for
> your storage:
>
> -------bacula-traymon.conf------
> Storage {
>     Name = bacula-tux64-sd
> ...
> }
>
> ----bacula-dir-full.conf----
> Storage {
>     Name = File
>    ...
> }
>
> ----bacula-sd-full.conf-----
>
> Storage {                             # definition of myself
>    Name = bacula-tux64-sd
>    ...
> }
>
> ​Could you try "Name = bacula-tux64-sd"​ in your bacula-dir-full.conf or
> "Name = File" in your bacula-traymon.conf for the storage definition?

If I change this but 'bat' doesn't work any more (probably bconsole too 
- not tested). Also it doesn't change the behaviour of traymonitor.

I had a look at the original bacula-dir.conf, e.g.

# Definition of a second file Virtual Autochanger device
#   Possibly pointing to a different disk drive
Storage {
   Name = File2
# Do not use "localhost" here
   Address = localhost                # N.B. Use a fully qualified name here
   SDPort = 9103
   Password = "@@SD_PASSWORD@@"
   Device = FileChgr2
   Media Type = File2
   Maximum Concurrent Jobs = 10        # run up to 10 jobs a the same time
}

so this seems to be correct.

Also I notice a warning:
26-Jun 19:36 bacula-tux64-dir: Warning: Cannot bind port 9101: ERR=Die 
angeforderte Adresse kann nicht zugewiesen werden: Retrying ...

english: Can't assign requested address. Retrying ...

Maybe it's relevant.

This configuration did work with bacula 5.x, I was not aware of thise 
changes in 7.x. Maybe v5.x was more sloppy with config files ...


Thank you,
Olaf

>
> Best regards,
> Ana
>
> On Fri, Jun 26, 2015 at 2:36 AM, olx69 <ope-linux AT gmx DOT de
> <mailto:ope-linux AT gmx DOT de>> wrote:
>
>     Hello Ane,
>
>     > Sorry I was out a few days.... Have you tested your Bacula with these
>     > "fake passwords"? Or you have just changed them for posting here? I
>     > found no errors in your passwords configurations, but I'm not sure if
>     > you are using these ones posted here. In the case you're not, could you
>     > verify your director to storage daemon password configuration (not the
>     > one for communicating with monitor)? The error message points to a
>     > mismatch here.
>
>
>     No, these are my real passwords! I trust in my secure LAN ;-)
>
>     Thank you,
>     Olaf
>
>
>     > On Tue, Jun 23, 2015 at 11:04 AM, olx69 <ope-linux AT gmx DOT de 
> <mailto:ope-linux AT gmx DOT de>
>      > <mailto:ope-linux AT gmx DOT de <mailto:ope-linux AT gmx DOT de>>> 
> wrote:
>      >
>      >     Am 18.06.2015 um 16:13 schrieb olx69:
>      >      > Hello Ana,
>      >      >
>      >      >> Sorry I'm late in this post.
>      >      >> It seems there is still some password mismatching problems.
>      >     Could you
>      >      >> post your resources definitions for monitor (in
>     bacula-dir.conf,
>      >      >> bacula-fd.conf and bacula-sd.conf) and your
>     tray-monitor.conf?
>      >      >
>      >      > thank you for investigating! attached the files,
>      >
>      >     no idea? Here the reduced password related part. Imo all is
>     correct,
>      >     isn't it?
>      >
>      >
>      >     -------bacula-traymon.conf------
>      >     Monitor {
>      >         Name = bacula-tux64-mon
>      >         Password = "MON_DIR_PASSWORD"         # password for the
>     Directors
>      >         RefreshInterval = 3 seconds
>      >     }
>      >     Client {
>      >         Name = bacula-tux64-fd
>      >         Address = tux64.home.lan
>      >         Password = "MON_FD_PASSWORD"          # password for
>     FileDaemon
>      >     }
>      >     Storage {
>      >         Name = bacula-tux64-sd
>      >         Address = tux64.home.lan
>      >         Password = "MON_SD_PASSWORD"          # password for
>     StorageDaemon
>      >     }
>      >     Director {
>      >         Name = bacula-tux64-dir
>      >         Address = tux64.home.lan
>      >     }
>      >     ----bacula-dir-full.conf----
>      >     Director {
>      >         Name = bacula-tux64-dir
>      >         Password = "DIR_PASSWORD"    # BConsole password
>      >     ....
>      >     }
>      >     Console {
>      >         Name = bacula-tux64-mon
>      >         Password = "MON_DIR_PASSWORD"
>      >     ...
>      >     }
>      >     Client {
>      >         Name = bacula-tux64-fd
>      >         Password = "FD_PASSWORD"            # password for FileDaemon
>      >     ...
>      >     }
>      >     -----bacula-fd-full.conf-----
>      >     Director {
>      >         Name = bacula-tux64-dir
>      >         Password = "FD_PASSWORD"
>      >     }
>      >     Director {
>      >         Name = bacula-tux64-mon
>      >         Password = "MON_FD_PASSWORD"
>      >     }
>      >     ----bacula-sd-full.conf-----
>      >     Director {
>      >         Name = bacula-tux64-dir
>      >         Password = "SD_PASSWORD"
>      >     }
>      >     Director {
>      >         Name = bacula-tux64-mon
>      >         Password = "MON_SD_PASSWORD"
>      >     ...
>      >     }
>      >
>      >
>       
> ------------------------------------------------------------------------------
>      >     Monitor 25 network devices or servers for free with OpManager!
>      >     OpManager is web-based network management software that monitors
>      >     network devices and physical & virtual servers, alerts via
>     email & sms
>      >     for fault. Monitor 25 devices for free with no restriction.
>     Download now
>      > http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
>      >     _______________________________________________
>      >     Bacula-users mailing list
>      > Bacula-users AT lists.sourceforge DOT net
>     <mailto:Bacula-users AT lists.sourceforge DOT net>
>      >     <mailto:Bacula-users AT lists.sourceforge DOT net
>     <mailto:Bacula-users AT lists.sourceforge DOT net>>
>      > https://lists.sourceforge.net/lists/listinfo/bacula-users
>      >
>      >
>
>
>     
> ------------------------------------------------------------------------------
>     Monitor 25 network devices or servers for free with OpManager!
>     OpManager is web-based network management software that monitors
>     network devices and physical & virtual servers, alerts via email & sms
>     for fault. Monitor 25 devices for free with no restriction. Download now
>     http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
>     _______________________________________________
>     Bacula-users mailing list
>     Bacula-users AT lists.sourceforge DOT net
>     <mailto:Bacula-users AT lists.sourceforge DOT net>
>     https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>


------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors 
network devices and physical & virtual servers, alerts via email & sms 
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users