Re: [Bacula-users] Could not connect to server Director daemon ....
2015-06-05 14:18:12
Hello Ana,
> Your daemons are listening on 127.0.0.2, and bacula is trying to connect
> on 198.162.1.11. You can configure Bacula to listen to any IP commenting
> the lines: DirAddress, FDAddress and SDAddress in bacula-dir.conf,
> bacula-fd.conf and bacula-sd.conf. Or you can check your DNS resolution.
> Maybe the FQDN hostname is being resolved to a local IP.
A quick search on the config files got:
$ find . -name \*.conf -exec egrep -H -i Address {} \; | sed -e '/:#/d'
./bacula-dir.conf: DirAddress = tux64.home.lan
./bacula-sd.conf: SDAddress = tux64.home.lan
./bacula-dir.conf.d/storage.conf: Address = tux64.home.lan
./bacula-dir.conf.d/client-tux32.conf: Address = tux32.home.lan
./bacula-dir.conf.d/client-tux64.conf: Address = tux64.home.lan
./bconsole.conf: address = tux64.home.lan
./tray-monitor.conf: Address = tux64.home.lan
./tray-monitor.conf: Address = tux64.home.lan
./tray-monitor.conf: Address = tux64.home.lan
./bat.conf: address = tux64.home.lan
$ cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
$ hostname
tux64.home.lan
so, why does it bind to loopback device ip?
> > Have you changed your PID directory to /var/run after upgrade?
> Can you
> > post the output of "netstat -nltup | grep bacula"?
>
> $ sudo netstat -nltup | grep bacula
> tcp 0 0 127.0.0.2:9101 <http://127.0.0.2:9101>
> 0.0.0.0:* LISTEN
> 855/bacula-dir
> tcp 0 0 127.0.0.2:9102 <http://127.0.0.2:9102>
> 0.0.0.0:*
> LISTEN 857/bacula-fd
> tcp 0 0 127.0.0.2:9103 <http://127.0.0.2:9103>
> 0.0.0.0:*
> LISTEN 851/bacula-sd
>
Thank you,
Olaf
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|