|
[Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re
2014-10-24 03:18:06
I already did,
found nothing useful than you should relabel it, or use /dev/nst0 instead of
/dev/st0.
I've always used /dev/st0
The correct tape is in the drive, the tape is labeled correct. I can mount all
28 tapes in the library, and are all recognized. Except for that one.
The last status of the tape was marked "append" so, it is not in error or
anything. Neither have I archived it or taken it out to archive it.
bacula version is v5.0.1 and is installed from ubuntu (10.04) repository
+----------------------------------------------------------------------
|This was sent by che AT belnet DOT be via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- Re: [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, John Drescher
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
|
|
|
