> I need to perform a restore, and one of the tapes the restore needs is not 
> being recognised. The error is as follows
>
> 23-Oct 10:04 bacula-sd JobId 133822: Warning: acquire.c:265 Read acquire: 
> Requested Volume "AOB760L4" on "tape_Drive" (/dev/st0) is not a Bacula 
> labeled Volume, because: ERR=block.c:1023 Read zero bytes at 0:0 on device 
> "tape_Drive" (/dev/st0).
> 23-Oct 10:04 bacula-sd JobId 133822: Please mount Volume "AOB760L4" for:
>
> I can mount any volume, but not that one tape. It is like bacula forgot the 
> tape.
>
> I have not changed anything like block size or any other an I surely do not 
> want to relabel the tape. because I need the info on the tape.
>
>
> Does anyone have suggestions? or can help me on this matter?

The tape may be corrupt or the wrong / blank tape may be in the drive
verify that first.

Also you should use /dev/nst0 instead of /dev/st0. Google the list
archives for discussions on this.

John

------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users