[Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re
2014-10-24 03:16:48
I already did,
found nothing useful than you should relabel it, or use /dev/nst0 instead of
/dev/st0.
I've always used /dev/st0
The correct tape is in the drive, the tape is labeled correct. I can mount all
28 tapes in the library, except that one.
The last status of the tape was marked "append" so, it is not in error or
anything. Neither have I archived it or taken it out to archive it.
bacula version is v5.0.1 and is installed from ubuntu (10.04) repository
+----------------------------------------------------------------------
|This was sent by che AT belnet DOT be via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- Re: [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, John Drescher
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re,
Che_m <=
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
- [Bacula-users] is not a Bacula labeled Volume, because: ERR=block.c:1023 Re, Che_m
|
|
|