Re: [Bacula-users] Using HP Storageworks 1/8 G2 with Bacula
2010-06-13 04:03:55
Daniel Bareiro schrieb:
> ...
> Now that I see, this has nothing to do with the tape drive:
>
> -------------------------------------------------------------------------
> backup:~# smartctl -i /dev/sda
> smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce
> Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Model Family: Seagate Barracuda 7200.9 family
> Device Model: ST3160211AS
> Serial Number: 6PT56S0F
> Firmware Version: 3.AAE
> User Capacity: 160,041,885,696 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 7
> ATA Standard is: Exact ATA specification draft version not indicated
> Local Time is: Sat Jun 12 14:49:31 2010 ART
> SMART support is: Available - device has SMART capability.
> SMART support is: Disabled
>
> SMART Disabled. Use option -s with argument 'on' to enable it.
> -------------------------------------------------------------------------
>
> It is the SATA disk, so this is consistent with that I didn't find the
> special file for the tape drive. Also, if it were the tape drive, type
> should be 'Sequential-Access'.
What does lsscsi show? Anything about the tape drive / changer in
dmesg?
Ralf
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|