> 
> > My guess is you do not have the sas driver loaded.
> 
> I forgot to comment this, but the SAS RAID controller card is
recognized
> by the operating system:
> 
>
------------------------------------------------------------------------
> ackup:~# lspci -vvv -s 02:00.0
> 02:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6
> controllers (rev 01)
>         Subsystem: Hewlett-Packard Company Smart Array P212

Contrary to my previous post, that device does indeed claim specific
support for the autoloader you are using, although the autoloader
quickspecs state that using it on a RAID controller is not recommended.

Please check that any BIOS options for supporting tape drive passthrough
on the RAID controller are enabled

Also make sure you have enabled the kernel driver tape drive support
option for that the RAID controller (CONFIG_CISS_SCSI_TAPE=y in your
kernel .config)

James


------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users