|
Yes, I was able to move the tapes perfectly fine from the command line using the mtx-changer script. �This is the error if I have no tape in the drive, but I have a tape in slot 1 of my autochanger:
10-Jun 07:12 myservername-sd JobId 806: Invalid slot=0 defined in catalog for Volume "Tape-0241" on "DLT-S4" (/dev/st0). Manual load may be required. 10-Jun 07:12�myservername-sd JobId 806: 3301 Issuing autochanger "loaded? drive 0" command.
*messages 10-Jun 07:12�myservername-sd JobId 806: 3302 Autochanger "loaded? drive 0", result: nothing loaded. 10-Jun 07:12�myservername-sd JobId 806: 3301 Issuing autochanger "loaded? drive 0" command.
*messages 10-Jun 07:12 nmyservername-sd JobId 806: 3302 Autochanger "loaded? drive 0", result: nothing loaded. 10-Jun 07:12 nmyservername-sd JobId 806: Warning: mount.c:221 Open device "DLT-S4" (/dev/st0) Volume "Tape-0241" failed: ERR=dev.c:491 Unable to open device "DLT-S4" (/dev/st0): ERR=No medium found
But if I run the changer script from the command line:
/etc/bacula/scripts/mtx-changer /dev/sg3 load 1 /dev/st0 0
And then I run the backup just like before with the tape in the drive it runs fine. �But once I start trying to backup another client, it unloads the tape, moves it to slot 1 and then I get the error "3302 Autochanger "loaded? drive 0""
2010/6/9 Norberto Meijome <numardbsd AT gmail DOT com>
2010/6/10 bwellsnc <bwellsnc AT gmail DOT com>
Here is what I have setup for my conf's. �I have my conf files in a conf.d directory. I added this to my bacula-dir.conf file:
Did you run all the suggested tests for mtx changer script , and did they all pass?
_________________________
{Beto|Norberto|Numard} Meijome
"I detest people who take short�cuts rather than do things right, because they leave shit for the rest of us to clean up."
� �PHK
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. �See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo _______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
| 