I'm still not sure my config on Solaris 10 x86 is correct.

When I modify st.conf adding the next lines and reloading the module I  
get this error in /var/adm/messages

/kernel/drv/st.conf:
tape-config-list=
"EXABYTE VXA-2", "Exabyte VXA-2", "VXA-2";
VXA-2 = 1,0x36,0,0x19e39,2,0x80,0x81,1;

/var/adm/messages:
Aug 22 22:16:05 chet scsi: [ID 193665 kern.info] st0 at mpt1: target 1  
lun 0
Aug 22 22:16:05 chet genunix: [ID 936769 kern.info] st0 is /pci@0,0/ 
pci1022,7450@a/pci1000,7130@5/st@1,0
Aug 22 22:16:05 chet scsi: [ID 107833 kern.notice] /pci@0,0/ 
pci1022,7450@a/pci1000,7130@5/st@1,0 (st0):
Aug 22 22:16:05 chet    VXA-2 options value invalid bits set: 0x4000
Aug 22 22:16:05 chet scsi: [ID 365881 kern.info] /pci@0,0/ 
pci1022,7450@a/pci1000,7130@5/st@1,0 (st0):
Aug 22 22:16:05 chet    <Exabyte VXA-2>

mt -f /dev/rmt/0cbn config
"EXABYTE VXA-2", "Exabyte VXA-2", "CFGEXABYTEVXA2";
CFGEXABYTEVXA2 =  
2,0x36,0,0x18E19,4,0x80,0x81,0x00,0x00,1,120,600,18000,18000,18000,18000,18000 
;

This page is talking about Sparc 
http://www.exabyte.com/support/online/kb/display.cfm?id=808

Martijn

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users