Hi,
I've updated bacula to version 2.2.8 (using blastwave). Still I can't
use the entire tape and I'm getting these errors:
In dmesg:
Aug 12 00:10:31 chet genunix: [ID 408822 kern.info] NOTICE: mpt1:
fault detected in device; service still available
Aug 12 00:10:31 chet genunix: [ID 611667 kern.info] NOTICE: mpt1:
Disconnected command timeout for Target 1
Aug 12 00:10:38 chet scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/
pci1022,7450@a/pci1000,7130@5/st@1,0 (st17):
Aug 12 00:10:38 chet SCSI transport failed: reason 'reset': giving up
And this is the bacula error:
12-Aug 00:05 chet-dir JobId 78: Start Backup JobId 78,
Job=Home_Directories_Job_Chet.2008-08-12_00.05.18
12-Aug 00:05 chet-dir JobId 78: Using Device "ExabyteVXA-2Drive"
12-Aug 00:10 chet-sd JobId 78: Error: block.c:569 Write error at
125:3674 on device "Exabyte VXA-2 Drive" (/dev/rmt/0cbn). ERR=I/O error.
12-Aug 00:10 chet-sd JobId 78: Error: Error writing final EOF to tape.
This Volume may not be readable.
dev.c:1669 ioctl MTWEOF error on "Exabyte VXA-2 Drive" (/dev/rmt/
0cbn). ERR=I/O error.
12-Aug 00:10 chet-sd JobId 78: End of medium on Volume "A0000001"
Bytes=70,649,607,168 Blocks=1,095,138 at 12-Aug-2008 00:10.
12-Aug 00:10 chet-sd JobId 78: 3307 Issuing autochanger "unload slot
1, drive 0" command.
12-Aug 00:13 chet-sd JobId 78: 3304 Issuing autochanger "load slot 5,
drive 0" command.
12-Aug 00:14 chet-sd JobId 78: 3305 Autochanger "load slot 5, drive
0", status is OK.
12-Aug 00:14 chet-sd JobId 78: 3301 Issuing autochanger "loaded? drive
0" command.
12-Aug 00:14 chet-sd JobId 78: 3302 Autochanger "loaded? drive 0",
result is Slot 5.
12-Aug 00:14 chet-sd JobId 78: Recycled volume "A0000005" on device
"Exabyte VXA-2 Drive" (/dev/rmt/0cbn), all previous data lost.
12-Aug 00:14 chet-sd JobId 78: New volume "A0000005" mounted on device
"Exabyte VXA-2 Drive" (/dev/rmt/0cbn) at 12-Aug-2008 00:14.
12-Aug 00:20 chet-sd JobId 78: Job write elapsed time = 00:11:28,
Transfer rate = 1.148 M bytes/second
12-Aug 00:20 chet-dir JobId 78: Bacula chet-dir 2.2.8 (26Jan08): 12-
Aug-2008 00:20:23
The job continues on the next available tape and I'm able to do a
restore.
I cleaned the tape drive before I ran this job.
Why can't store at least 80GB on a tape, what is causing the error?
Martijn
On Jul 30, 2008, at 8:21 PM, John Drescher wrote:
> On Wed, Jul 30, 2008 at 2:19 PM, Martijn de Munnik <martijn AT youngguns DOT
> nl
> > wrote:
>> dmesg output;
>>
>> Jul 24 05:37:03 chet genunix: [ID 408822 kern.info] NOTICE: mpt1:
>> fault
>> detected in device; service still available
>> Jul 24 05:37:03 chet genunix: [ID 611667 kern.info] NOTICE: mpt1:
>> Disconnected command timeout for Target 1
>> Jul 24 05:37:17 chet scsi: [ID 107833 kern.warning] WARNING:
>> /pci@0,0/pci1022,7450@a/pci1000,7130@5/st@1,0 (st17):
>> Jul 24 05:37:17 chet SCSI transport failed: reason 'reset':
>> giving up
>>
>> I'll put a cleaning tape in the drive. Is there an easy way to do
>> this with
>> bacula (cleaning tape is in slot 10).
>>
> I believe there was a feature request for this but it is not
> implemented yet. I just load and unload the cleaning tape via the
> changer itself.
>
> John
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
