Hi!
Could you please help me with the conf of Amanda?
I don't understand where did I make an error in the configuration....

I receive the error:
amanda@bkpsrv01:/etc/amanda/Daily01$ /usr/libexec/chg-zd-mtx -status
<none> changerfile must be specified in amanda.conf

But when i test the MTX (ZD for source forge):
amanda@bkpsrv01:/etc/amanda/Daily01$ /usr/sbin/mtx -f /dev/sg2 status
  Storage Changer /dev/sg2:2 Drives, 61 Slots ( 1 Import/Export )
Data Transfer Element 0:Empty
Data Transfer Element 1:Empty
      Storage Element 1:Full :VolumeTag=MSK001
      Storage Element 2:Full :VolumeTag=MSK002
      Storage Element 3:Full :VolumeTag=MSK003
      Storage Element 4:Full :VolumeTag=MSK004
      Storage Element 5:Full :VolumeTag=MSK005
      Storage Element 6:Full :VolumeTag=MSK006
      Storage Element 7:Full :VolumeTag=MSK007
      Storage Element 8:Full :VolumeTag=MSK008
      Storage Element 9:Full :VolumeTag=MSK009
      Storage Element 10:Full :VolumeTag=MSK010
      Storage Element 11:Full :VolumeTag=MSK011
      Storage Element 12:Full :VolumeTag=MSK012
      Storage Element 13:Full :VolumeTag=MSK013
      Storage Element 14:Full :VolumeTag=MSK014
      Storage Element 15:Full :VolumeTag=MSK015
      Storage Element 16:Full :VolumeTag=MSK016
      Storage Element 17:Full :VolumeTag=MSK017
      Storage Element 18:Full :VolumeTag=MSK018
      Storage Element 19:Full :VolumeTag=MSK019
      Storage Element 20:Full :VolumeTag=MSK020
      Storage Element 21:Full :VolumeTag=CLN001
      Storage Element 22:Full :VolumeTag=CLN002
      Storage Element 23:Empty
      Storage Element 24:Empty
      Storage Element 25:Empty
      Storage Element 26:Empty
      Storage Element 27:Empty
      Storage Element 28:Empty
      Storage Element 29:Empty
      Storage Element 30:Empty
      Storage Element 31:Empty
      Storage Element 32:Empty
      Storage Element 33:Empty
      Storage Element 34:Empty
      Storage Element 35:Empty
      Storage Element 36:Empty
      Storage Element 37:Empty
      Storage Element 38:Empty
      Storage Element 39:Empty
      Storage Element 40:Empty
      Storage Element 41:Empty
      Storage Element 42:Empty
      Storage Element 43:Empty
      Storage Element 44:Empty
      Storage Element 45:Empty
      Storage Element 46:Empty
      Storage Element 47:Empty
      Storage Element 48:Empty
      Storage Element 49:Empty
      Storage Element 50:Empty
      Storage Element 51:Empty
      Storage Element 52:Empty
      Storage Element 53:Empty
      Storage Element 54:Empty
      Storage Element 55:Empty
      Storage Element 56:Empty
      Storage Element 57:Empty
      Storage Element 58:Empty
      Storage Element 59:Empty
      Storage Element 60:Empty
      Storage Element 61 IMPORT/EXPORT:Empty



Here there are two my files...
/etc/amanda/Daily01/amanda.conf:

org "Daily01"
mailto "amanda"
dumpuser "amanda"
inparallel 4
netusage  600 Kbps
dumpcycle 4 weeks
runspercycle 20

tapecycle 25 tapes
runtapes 2
tpchanger "chg-zd-mtx"
tapedev "0"
changerdev /dev/sg2
changerfile "/etc/amanda/Daily01/chg-zd-mtx"

tapetype DLT7000
labelstr "^MSK[0-9][0-9]*$"

define tapetype DLT7000 {
    comment "DLT tape drives"
    length 35000 mbytes     # 35 Gig tapes
    filemark 8 kbytes       # I don't know what this means
    speed 10 mbytes         # 10 Mb/s
}

/etc/amanda/Daily01/chg-zd-mtx.conf:
number_configs          2
eject                   1       # Tapedrives need an eject command
sleep                   90      # Seconds to wait until the tape gets ready
cleanmax                100     # How many times could a cleaning tape get
used
changerdev              /dev/sg2


#
# Next comes the data for drive 0
#
config                  0
drivenum                0
dev                     /dev/nst0
scsitapedev             /dev/st0
driveslot               0
startuse                1       # The slots associated with the drive 0
enduse                  10      #
statfile                /etc/amanda/dailuyset/tape0-slot  # The file where
the
actual slot is stored
autoclean               25
cleancart               5       # the slot where the cleaningcartridge for
drive 0 is located
cleanslot               21
havereader              1
offline_before_unload   1
unloadpause             15
poll_drive_ready        5
max_drive_wait          120
initial_poll_delay      10
cleanfile       /etc/amanda/DailySet01/tape0-clean # The file where the
cleanings are recorded
usagecount      /etc/amanda/DailySet01/totaltime0
tapestatus      /etc/amanda/DailySet01/tapestatus0 # here will some status
infos be stored
labelfile       /etc/amanda/DailySet01/labelfile0 # Use this if you have an
barcode reader

#
# Next comes the data for drive 1
#
config                  1
drivenum                1
dev                     /dev/nst1
scsitapedev             /dev/st1
driveslot               0
startuse                11      # The slots associated with the drive 0
enduse                  20      #
statfile                /etc/amanda/dailuyset/tape1-slot  # The file where
the
actual slot is stored
autoclean               25
cleancart               5       # the slot where the cleaningcartridge for
drive 0 is located
cleanslot               22
havereader              1
offline_before_unload   1
unloadpause             15
poll_drive_ready        5
max_drive_wait          120
initial_poll_delay      10
cleanfile       /etc/amanda/DailySet01/tape1-clean # The file where the
cleanings are recorded
usagecount      /etc/amanda/DailySet01/totaltime1
tapestatus      /etc/amanda/DailySet01/tapestatus1 # here will some status
infos be stored
labelfile       /etc/amanda/DailySet01/labelfile1 # Use this if you have an
barcode reader





Ilya Basin
WideXs Svyaz llc, an ionip company
System Engineer

Email:   Ilya.Basin AT ionip DOT ru
Mobile: +7 095 1051217
Phone: +7 095 7979160
Fax:     +7 095 7979161

http://www.widexs.ru