As part of the NetView installation, a system environment variable, 
NV_DRIVE is created and set to the location where NetView is installed. 
Almost every NetView process checks this variable on startup.  Sounds to 
me as though yours is messed up, though I cannot say how it got that way. 
We have many lab boxes with the code installed on drives D or E and it 
always works fine.

Anyway, go to the Control Panel and System and look under Environment 
(that's the path for NT, I don't have a Win2K box handy to check if that 
is the same but it should be close).  You should see NV_DRIVE with the 
proper drive set as a system variable.  If you don't then something 
definitely went wrong with your installation.  If it's not there, you can 
try creating a user variable from there and see if that helps, but there 
is no telling what else went wrong with your installation. I'd be looking 
at the nvinstal.log in /usr/OV/log.   You may just want to remove it all 
and re-install.  If that doesn't work, I suggest a call to Support.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
 





pweischer AT mmm DOT com
04/12/2002 07:31 AM

 
        To:     "Mark van Kerkwyk" <mark AT vk DOT net>
        cc:     "nv-l" <nv-l AT lists.tivoli DOT com>
        Subject:        Re: [nv-l] Problems with netview 7.1 in Win2K 
professional

 


Hello,
we are running NetView 7.1 on W2K Server on the D: drive without any
problems.
We did not setup anything special for NetView in the OS.

On our servers, Service Pack 2 is installed. Do you have any service pack
installed?


Peter Weischer
IT-TIP / Technology and Infrastructure Projects
3M Deutschland GmbH, Carl-Schurz-Str. 1, 41453 Neuss
Fon: +49 (0)2131 14 2401, Fax: +49 (0)2131 14 122401
Triminet: 444 2401, eMail: pweischer AT mmm DOT com


  
                    "Mark van  
                    Kerkwyk"             To:     "nv-l" 
<nv-l AT lists.tivoli DOT com> 
                    <mark AT vk DOT net>        cc:     (bcc: Peter 
Weischer/GE-Europe/3M/US) 
                                         Subject:     [nv-l] Problems with 
netview 7.1 in Win2K 
                    12.04.2002            professional   
                    14:02  
  
  





Anyone had problems getting Netview 7.1 installed on WIN2K Pro.

The install hangs everytime during the setting up ODBC bit, a cmd.exe box
pops up and never goes away and the Netview stops responding also.

I wonder if Netview will run properly on a drive other than C: also, I 
have
installed all code on D: but when starting the service (after a failed
install), it says that certain files files do not exist, when they do
actually exist on D: drive in the path stated (without the drive letter).

Any ideas ??

Mark


---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)





---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)