Bacula-users

Re: [Bacula-users] Configuration reload for bacula-sd

2014-10-28 15:17:52
Subject: Re: [Bacula-users] Configuration reload for bacula-sd
From: Ana Emília M. Arruda <emiliaarruda AT gmail DOT com>
To: Alan Brown <ajb2 AT mssl.ucl.ac DOT uk>
Date: Tue, 28 Oct 2014 16:12:35 -0300
On Tue, Oct 28, 2014 at 3:46 PM, Alan Brown <ajb2 AT mssl.ucl.ac DOT uk> wrote:
On 28/10/14 18:39, Dimitri Maziuk wrote:

What it can't handle is that you can load media types LTO4 RW in the
LTO5 drives and also LTO3 RO, which would be extremely handy.


​You can get this just defining two device that references the same drive: one that will work with LTO4 tapes and the other will work with the LTO5 tapes. I have this configured and it is working fine. The same tape library reads/writes LTO-3 and LTO-5 HP tapes.​

Is this could be best configured? Yes, I think. If we could set "Media type = LTO-3. LTO-4". But this is still not implemented and I´m not sure about the difficulties this should represent. Because in database we have a volume (tape) associated with a media type. Maybe if we could have another "media type" directive for pools. So we could say: this device can read/write LTO-4 and LTO-5 types, but the volumes in this pool are from media type = LTO-5.
 




------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users