Solved I think:

10-May 21:05 VLNBackup-dir JobId 3017: Start Backup JobId 3017, Job=NAS1_TV.2014-05-10_21.05.12_38

10-May 21:05 VLNBackup-dir JobId 3017: Using Device "eSATA-drive-0" to write.

10-May 20:55 vulcans-sd JobId 3017: 3304 Issuing autochanger "load slot 119, drive 0" command.

10-May 20:56 NAS1-fd JobId 3017: Fatal error: job.c:2395 Bad response to Append Data command. Wanted 3000 OK data

, got 3903 Error append data

10-May 20:55 vulcans-sd JobId 3017: Fatal error: 3992 Bad autochanger "load slot 119, drive 0": ERR=Unknown error during program execvp.

Results=failed to rename volume file while loading drive 0 from slot 119

so I deleted the drive0 file on the drive and the job started.

 the job is 6tb worth of data so it will be a few days before I see results will start a new thread if it doesn't complete.

On Sat, May 10, 2014 at 5:49 PM, Dan Langille <dan AT langille DOT org> wrote:

On May 10, 2014, at 3:19 PM, Vizo Allman <vizoster AT gmail DOT com> wrote:

> I have an sd on its on server with esata dock attached. I have had a couple of jobs fail with network reset error when I try to run the job again I get this:
>
>
> 10-May 14:44 VLNBackup-dir JobId 3012: Start Backup JobId 3012, Job=NAS1_TV.2014-05-10_14.44.29_27
> 10-May 14:44 VLNBackup-dir JobId 3012: Using Device "eSATA-drive-0" to write.
> 10-May 14:36 NAS1-fd JobId 3012: Fatal error: job.c:2395 Bad response to Append Data command. Wanted 3000 OK data
> , got 3903 Error append data

are all your SD and DIR on the same version?

>
> I am still learning bacula and have yet to get a job completed that is over 1.3 TB . but since I still have space left on the drive I would think it would append when I run the job again.
>
> Anyone have ideas how to troubleshoot?
>
> Some info to start with
>
> Backup-dir Version: 5.2.13 (19 February 2013) x86_64-pc-linux-gnu gentooDevice status:
>
> status storage:
>
> Autochanger "VLN-eSATA-Changer" with devices:
>    "eSATA-drive-0" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/0/drive0)
>    "eSATA-drive-1" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/1/drive1)
>    "eSATA-drive-2" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/2/drive2)
>    "eSATA-drive-3" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/3/drive3)
>
> Device "eSATA-drive-0" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/0/drive0) is not open.
>     Drive 0 is not loaded.
> ==
>
> Device "eSATA-drive-1" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/1/drive1) is not open.
>     Drive 1 is not loaded.
> ==
>
> Device "eSATA-drive-2" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/2/drive2) is not open.
>     Drive 2 is not loaded.
> ==
>
> Device "eSATA-drive-3" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/3/drive3) is not open.
>     Drive 3 is not loaded.
> ==
>
> Device "VLNNas" (/mnt/vulcanssd) is not open.
> ==
> ====
>
> Used Volume status:
> VLN-eSATA-Changer_0004_0119 on device "eSATA-drive-0" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/0/drive0)
>     Reader=0 writers=0 reserves=0 volinuse=1
>
>
>
>
> --
> "Nor aught availed him now
> To have build in Heaven high towers    Nor did he scape
> By all his engines
> But was headlong sent with his industrious crew
> To build in Hell
> "Milton, "Paradise Lost"

> ------------------------------------------------------------------------------
> Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
> &#149; 3 signs your SCM is hindering your productivity
> &#149; Requirements for releasing software faster
> &#149; Expert tips and advice for migrating your SCM now
> http://p.sf.net/sfu/perforce_______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users

--
Dan Langille - http://langille.org

--
"Nor aught availed him now
To have build in Heaven high towers    Nor did he scape
By all his engines
But was headlong sent with his industrious crew
To build in Hell
"Milton, "Paradise Lost"

------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
• 3 signs your SCM is hindering your productivity
• Requirements for releasing software faster
• Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users