On May 10, 2014, at 3:19 PM, Vizo Allman <vizoster AT gmail DOT com> wrote:

> I have an sd on its on server with esata dock attached. I have had a couple 
> of jobs fail with network reset error when I try to run the job again I get 
> this:
> 
> 
> 10-May 14:44 VLNBackup-dir JobId 3012: Start Backup JobId 3012, 
> Job=NAS1_TV.2014-05-10_14.44.29_27
> 10-May 14:44 VLNBackup-dir JobId 3012: Using Device "eSATA-drive-0" to write.
> 10-May 14:36 NAS1-fd JobId 3012: Fatal error: job.c:2395 Bad response to 
> Append Data command. Wanted 3000 OK data
> , got 3903 Error append data

are all your SD and DIR on the same version?

>  
> I am still learning bacula and have yet to get a job completed that is over 
> 1.3 TB . but since I still have space left on the drive I would think it 
> would append when I run the job again.
> 
> Anyone have ideas how to troubleshoot?
> 
> Some info to start with
> 
> Backup-dir Version: 5.2.13 (19 February 2013) x86_64-pc-linux-gnu 
> gentooDevice status:
> 
> status storage:
> 
> Autochanger "VLN-eSATA-Changer" with devices:
>    "eSATA-drive-0" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/0/drive0)
>    "eSATA-drive-1" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/1/drive1)
>    "eSATA-drive-2" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/2/drive2)
>    "eSATA-drive-3" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/3/drive3)
> 
> Device "eSATA-drive-0" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/0/drive0) 
> is not open.
>     Drive 0 is not loaded.
> ==
> 
> Device "eSATA-drive-1" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/1/drive1) 
> is not open.
>     Drive 1 is not loaded.
> ==
> 
> Device "eSATA-drive-2" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/2/drive2) 
> is not open.
>     Drive 2 is not loaded.
> ==
> 
> Device "eSATA-drive-3" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/3/drive3) 
> is not open.
>     Drive 3 is not loaded.
> ==
> 
> Device "VLNNas" (/mnt/vulcanssd) is not open.
> ==
> ====
> 
> Used Volume status:
> VLN-eSATA-Changer_0004_0119 on device "eSATA-drive-0" 
> (/var/lib/bacula/vchanger/VLN-eSATA-Changer/0/drive0)
>     Reader=0 writers=0 reserves=0 volinuse=1
> 
> 
> 
> 
> -- 
> "Nor aught availed him now
> To have build in Heaven high towers    Nor did he scape
> By all his engines
> But was headlong sent with his industrious crew 
> To build in Hell
> "Milton, "Paradise Lost"
> ------------------------------------------------------------------------------
> Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
> &#149; 3 signs your SCM is hindering your productivity
> &#149; Requirements for releasing software faster
> &#149; Expert tips and advice for migrating your SCM now
> http://p.sf.net/sfu/perforce_______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users

-- 
Dan Langille - http://langille.org

signature.asc
Description: Message signed with OpenPGP using GPGMail

------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
• 3 signs your SCM is hindering your productivity
• Requirements for releasing software faster
• Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users