On May 10, 2014, at 3:19 PM, Vizo Allman <vizoster AT gmail DOT com> wrote:

> I have an sd on its on server with esata dock attached. I have had a couple of jobs fail with network reset error when I try to run the job again I get this:
>
>
> 10-May 14:44 VLNBackup-dir JobId 3012: Start Backup JobId 3012, Job=NAS1_TV.2014-05-10_14.44.29_27
> 10-May 14:44 VLNBackup-dir JobId 3012: Using Device "eSATA-drive-0" to write.
> 10-May 14:36 NAS1-fd JobId 3012: Fatal error: job.c:2395 Bad response to Append Data command. Wanted 3000 OK data
> , got 3903 Error append data

are all your SD and DIR on the same version?

>
> I am still learning bacula and have yet to get a job completed that is over 1.3 TB . but since I still have space left on the drive I would think it would append when I run the job again.
>
> Anyone have ideas how to troubleshoot?
>
> Some info to start with
>
> Backup-dir Version: 5.2.13 (19 February 2013) x86_64-pc-linux-gnu gentooDevice status:
>
> status storage:
>
> Autochanger "VLN-eSATA-Changer" with devices:
>    "eSATA-drive-0" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/0/drive0)
>    "eSATA-drive-1" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/1/drive1)
>    "eSATA-drive-2" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/2/drive2)
>    "eSATA-drive-3" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/3/drive3)
>
> Device "eSATA-drive-0" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/0/drive0) is not open.
>     Drive 0 is not loaded.
> ==
>
> Device "eSATA-drive-1" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/1/drive1) is not open.
>     Drive 1 is not loaded.
> ==
>
> Device "eSATA-drive-2" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/2/drive2) is not open.
>     Drive 2 is not loaded.
> ==
>
> Device "eSATA-drive-3" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/3/drive3) is not open.
>     Drive 3 is not loaded.
> ==
>
> Device "VLNNas" (/mnt/vulcanssd) is not open.
> ==
> ====
>
> Used Volume status:
> VLN-eSATA-Changer_0004_0119 on device "eSATA-drive-0" (/var/lib/bacula/vchanger/VLN-eSATA-Changer/0/drive0)
>     Reader=0 writers=0 reserves=0 volinuse=1
>
>
>
>
> --
> "Nor aught availed him now
> To have build in Heaven high towers    Nor did he scape
> By all his engines
> But was headlong sent with his industrious crew
> To build in Hell
> "Milton, "Paradise Lost"

> ------------------------------------------------------------------------------
> Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
> &#149; 3 signs your SCM is hindering your productivity
> &#149; Requirements for releasing software faster
> &#149; Expert tips and advice for migrating your SCM now
> http://p.sf.net/sfu/perforce_______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users

--
Dan Langille - http://langille.org