Re: [Bacula-users] bconsole mtx-changer issue when loading cleaning tape (IBM tape media)
2013-05-30 10:25:15
Ana Emília Machado de Arruda wrote:
> Hello!
>
Hello Ana
> About your update slots command bellow it works as expected. Since you
> don´t have the volumes in catalog, as you said.
> You should label them:
>
I have CHeck Label = YES
and
Label Type = IBM
turner on.
Does this mean for any new tape that has never been written to before I
have to initialize it in the way you describe below?
> 1) with mtx or mtx-changer script load each tape into drive and do:
>
> 1.a) mt -f /dev/nst0 rewind
> 1.b) mt -f /dev/nst0 weof
>
> 2) after unloading the tape, label them using bconsole command "label
> barcodes"
>
------------------------------------------------------------------------------
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance bottlenecks with <2% overhead
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap1
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|