|
Re: [Bacula-users] Hardware configuration and off-site backup
2010-05-05 12:34:01
>> >No way are your SATA drives that fast. More likely 1/4 to 1/3 of that
> If the link is 90 MB/s and drives deliver 1/4 of 375 MB/s(94 MB/s) - that's
> a throughput of about 90 MB/s. That's a whopping speed of 324 GB/hr. You
> must be going through a fiber switch to a striped array of sorts.
>
Agreed. That was assuming the unrealistic scenario where all reads (no
writes) were large sequential reads on the outer tracks of the hard
drive.
John
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|
