> -----Original Message-----
> From: John Drescher [mailto:drescherjm AT gmail DOT com]
> Sent: Wednesday, November 19, 2008 9:35 AM
> To: Robert LeBlanc
> Cc: bacula-users AT lists.sourceforge DOT net
> Subject: Re: [Bacula-users] Fibre Channel drives keep switching
> 
> I see. I think the problem is mtx will load the tape into the first
> real drive in the changer and with the /dev/nst0 and /dev/nst1
> switched bacula will look for the tape in the wrong drive when
> /dev/nst1 is the first drive in the changer.
> 

This is the exact problem that I am seeing. I couldn't put it into those
words for some reason.



Robert LeBlanc
College of Life Sciences Computer Support
Brigham Young University
(801) 422-1882
leblanc AT byu DOT edu





-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users