>This
> causes great problems with Bacula. What will happen is Bacula needs a
> tape in Drive0, but unload the tape in Drive1 into the slot for Drive0
> and load the correct tape into Drive1, then find that the wrong tape is
> in Drive0 and wait for a mount of the correct tape. I have to stop the
> SD, swap the /dev/st[01] entries, restart the SD, perform an 'update
> slots', after a few jobs crash, then they start working again. After the
> jobs run, I have to manually move tapes around to get them back into the
> correct slots and do another 'update slots'.
>

I see. I think the problem is mtx will load the tape into the first
real drive in the changer and with the /dev/nst0 and /dev/nst1
switched bacula will look for the tape in the wrong drive when
/dev/nst1 is the first drive in the changer.

John

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users