I also see these errors in the dmesg output after I loaded the
cleaning tape.
Jul 30 20:41:03 chet Error for Command: rezero/rewind
Error Level: Fatal
Jul 30 20:41:03 chet scsi: [ID 107833 kern.notice] Requested
Block: 0 Error Block: 0
Jul 30 20:41:03 chet scsi: [ID 107833 kern.notice] Vendor:
EXABYTE Serial Number: V1210D 01
Jul 30 20:41:03 chet scsi: [ID 107833 kern.notice] Sense Key: Not
Ready
Jul 30 20:41:03 chet scsi: [ID 107833 kern.notice] ASC: 0x30
(cleaning cartridge installed), ASCQ: 0x3, FRU: 0x0
Jul 31 08:15:16 chet scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/
pci1022,7450@a/pci1000,7130@5/st@1,0 (st17):
Jul 31 08:15:16 chet Error for Command: rezero/rewind
Error Level: Fatal
Jul 31 08:15:16 chet scsi: [ID 107833 kern.notice] Requested
Block: 0 Error Block: 0
Jul 31 08:15:16 chet scsi: [ID 107833 kern.notice] Vendor:
EXABYTE Serial Number: V1210D 01
Jul 31 08:15:16 chet scsi: [ID 107833 kern.notice] Sense Key: Not
Ready
Jul 31 08:15:16 chet scsi: [ID 107833 kern.notice] ASC: 0x3a
(medium not present), ASCQ: 0x0, FRU: 0x0
Martijn
On Jul 30, 2008, at 8:21 PM, John Drescher wrote:
> On Wed, Jul 30, 2008 at 2:19 PM, Martijn de Munnik <martijn AT youngguns DOT
> nl
> > wrote:
>> dmesg output;
>>
>> Jul 24 05:37:03 chet genunix: [ID 408822 kern.info] NOTICE: mpt1:
>> fault
>> detected in device; service still available
>> Jul 24 05:37:03 chet genunix: [ID 611667 kern.info] NOTICE: mpt1:
>> Disconnected command timeout for Target 1
>> Jul 24 05:37:17 chet scsi: [ID 107833 kern.warning] WARNING:
>> /pci@0,0/pci1022,7450@a/pci1000,7130@5/st@1,0 (st17):
>> Jul 24 05:37:17 chet SCSI transport failed: reason 'reset':
>> giving up
>>
>> I'll put a cleaning tape in the drive. Is there an easy way to do
>> this with
>> bacula (cleaning tape is in slot 10).
>>
> I believe there was a feature request for this but it is not
> implemented yet. I just load and unload the cleaning tape via the
> changer itself.
>
> John
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
