dmesg output;

Jul 24 05:37:03 chet genunix: [ID 408822 kern.info] NOTICE: mpt1:  
fault detected in device; service still available
Jul 24 05:37:03 chet genunix: [ID 611667 kern.info] NOTICE: mpt1:  
Disconnected command timeout for Target 1
Jul 24 05:37:17 chet scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/ 
pci1022,7450@a/pci1000,7130@5/st@1,0 (st17):
Jul 24 05:37:17 chet    SCSI transport failed: reason 'reset': giving up

I'll put a cleaning tape in the drive. Is there an easy way to do this  
with bacula (cleaning tape is in slot 10).

Martijn

On Jul 30, 2008, at 8:07 PM, John Drescher wrote:

>> There are some compressed files in the backup sets but also a lot  
>> of text
>> files (mail, html, config files etc). I think the c in /dev/rmt/ 
>> 0cbn means
>> compression (hardware compression on the tape) but I'm not sure. So  
>> I expect
>> at least 80GB to fit on one tape.
>>
> Then definitely disregard both my statements because the tape would
> not have been full. Are there any errors in your dmesg output? Have
> you cleaned the tape drive recently?
>
> John
>


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users