Re: [Bacula-users] Ultrium 480 / Ultrium 448
2008-07-24 16:51:03
Hi,
This seems to be a good page to start on:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpg50460
You should contact your tech support representative and see what they recommend
to troubleshoot.
Regards,
Alex
On Fri, 25 Jul 2008 07:55:28 +1200
John Huttley <John AT mib-infotech.co DOT nz> wrote:
> To test the tape drive,
> install it under windows
>
> download the tape test tools from hp.
>
> That will enable indepth testing and also can update the firmware if
> required.
>
> --John
>
>
> Sauron99 AT gmx DOT de wrote:
> > Hello again!
> > Im sorry it is a HP Storage Works Ultrium 448 Tape Streamer not 480.
> >
> > That´s the error I get:
> >
> > St0: Current: sense key: Hardware Error
> > Additional sense: Internet target failure Info fld=0xfc00
> >
> >
> > So what´s the problem with it ? I don´t think that the TapeStreamer is
> > broken but how should I test ?
> >
> > Best regards
> >
> >
> > Hello,
> > Im new on this list and as you can imagine I need your help ;).
> > At the moment Im trying to get Bacula up and running. So I have buyed a new
> > HP Server and a HP Ultrium 480 TapeStreamer.
> >
> > Now Im trying to install Bacula on my Debian Etch Server with the Standard
> > .deb Packages and I don´t get the TapeStreamer running.
> >
> > See what happens
> >
> >
> > "root@Maschine:~# btape -c /etc/bacula/bacula-sd.conf /dev/st0 Tape block
> > granularity is 1024 bytes.
> > btape: butil.c:272 Using device: "/dev/st0" for writing.
> > btape: btape.c:338 open device "Ultrium480" (/dev/st0): OK *test
> >
> > === Write, rewind, and re-read test ===
> >
> > I'm going to write 1000 records and an EOF then write 1000 records and an
> > EOF, then rewind, and re-read the data to verify that it is correct.
> >
> > This is an *essential* feature ...
> >
> > 23-Jul 15:39 btape: btape Error: block.c:538 Write error at 0:1 on device
> > "Ultrium480" (/dev/st0). ERR=Eingabe-/Ausgabefehler."
> >
> > Well Im not really sure if my Ultrium480 is /dev/st0 or /dev/nst0, but
> >
> > dmesg | grep st0
> > st 0:0:3:0: Attached scsi tape st0
> > st0: try direct i/o: yes (alignment 512 B)
> > st0: Block limits 1 - 16777215 bytes.
> > st0: MTSETDRVBUFFER only allowed for root.
> >
> > says so.
> >
> > Here is my bacula-sd.conf. Hopefully you can help me setting up a new
> > LinuxService :).
> >
> >
> > best regards
> >
> >
> > Torben Klassen
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|