Do you have the autochanger configured in you sd?

James Courtier-Dutton wrote:
> 2008/6/27 Brian Debelius <bdebelius AT intelesyscorp DOT com>:
>   
>> James Courtier-Dutton wrote:
>>     
>>> Hi,
>>>
>>> I have a problem whereby
>>>
>>> mount slot=2
>>>
>>> does not load the tape from slot 2.
>>> I have to use command line mtx command to load the tape.
>>>
>>>
>>> umount
>>> works as it returns the tape to slot 2.
>>>
>>> The bacula manual for 2.4.0 of bacula states that this should be
>>> possible, but it does not seem to work.
>>>
>>> Kind Regards
>>>
>>> James
>>>
>>>       
>> Try
>>
>> mount storage=yourtapedrive slot=2
>>
>>     
>
> mount storage=Tape slot=4
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3302 Autochanger "loaded? driver 0", result: nothing loaded.
> 3901 Unable to open device "Driver-1" (/dev/st0): ERR=dev.c:432 Unable
> to open device "Driver-1" (/dev/st0): ERR=No medium found
>
>
> As you can see, it is not even attempting an autochanger load 4
>   


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users