Re: [Bacula-users] mount does not load tape from autochanger
2008-06-27 13:47:36
> mount storage=Tape slot=4
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3302 Autochanger "loaded? driver 0", result: nothing loaded.
> 3901 Unable to open device "Driver-1" (/dev/st0): ERR=dev.c:432 Unable
> to open device "Driver-1" (/dev/st0): ERR=No medium found
>
>
> As you can see, it is not even attempting an autochanger load 4
>
First off use /dev/nst0 instead of /dev/st0.
Also have you run the autochanger tests?
John
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|