2008/6/27 Brian Debelius <bdebelius AT intelesyscorp DOT com>:
> James Courtier-Dutton wrote:
>>
>> Hi,
>>
>> I have a problem whereby
>>
>> mount slot=2
>>
>> does not load the tape from slot 2.
>> I have to use command line mtx command to load the tape.
>>
>>
>> umount
>> works as it returns the tape to slot 2.
>>
>> The bacula manual for 2.4.0 of bacula states that this should be
>> possible, but it does not seem to work.
>>
>> Kind Regards
>>
>> James
>>
>
> Try
>
> mount storage=yourtapedrive slot=2
>

mount storage=Tape slot=4
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? driver 0", result: nothing loaded.
3901 Unable to open device "Driver-1" (/dev/st0): ERR=dev.c:432 Unable
to open device "Driver-1" (/dev/st0): ERR=No medium found


As you can see, it is not even attempting an autochanger load 4

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users