Am 04.06.2008 um 15:42 schrieb Josh Fisher:

>>
>> Now when it comes to backups, the client tries to reach the sd  
>> using  the ip 10.1.2.10, which results in a timeout.
>>
>
> Is the SD listening on 10.1.2.10? For your multi-homed setup, you  
> probably need to set SDAddresses in the Storage directive of bacula- 
> sd.conf.



The SD listens on 0.0.0.0:9103.
When i try to telnet to that ip/port from the client in the  
10.1.3.0/24 network, i get disconnected after sending some crap. In  
that case i even see error messages regarding a malformed helo, which  
sounds good to me, since that shows that the sd is listening and even  
processing my telnet "request".


Kind regards

Ariano Bertacca
Systemmanagement


fon +49 211 7357-834 | fax +49 211 7357-859

-- 
Vereinigte Verlagsanstalten GmbH
Höherweg 278 | 40231 Düsseldorf
fon +49 211 7357-0 | fax +49 211 7357-123

HR Düsseldorf HRB 658
Geschäftsführer Stefan Meutsch




-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users