On Thu, Feb 28, 2013 at 9:53 AM, upen <upendra.gandhi AT gmail DOT com> wrote:
> Hi,
>
> I have been trying to configure my winxp box to use the method from
> http://www.michaelstowe.com/backuppc/
>
> I emailed the blog owner but it's possible they are busy so haven't
> heard from them. Any help is appreciated.
>
> Here is the dump tried from command prompt.
>
> BackupPC_dump -v -f a.b.c.d
> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d
> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d
> PING a.b.c.d (1.2.3.4) 56(84) bytes of data.
> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=0.367 ms
>
> --- a.b.c.d ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> rtt min/avg/max/mdev = 0.367/0.367/0.367/0.000 ms
> Previous state preserved: ON
>
> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d
> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d
> PING a.b.c.d (1.2.3.4) 56(84) bytes of data.
> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=0.353 ms
>
> --- a.b.c.d ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> rtt min/avg/max/mdev = 0.353/0.353/0.353/0.000 ms
> Previous state preserved: ON
>
> CheckHostAlive: returning 0.353
> Executing DumpPreUserCmd: /tmp/backuppc/preusercmd.sh a.b.c.d
> cmdSystemOrEval: about to system /tmp/backuppc/preusercmd.sh a.b.c.d
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Microsoft (R) Windows Script Host Version 5.7
> Copyright (C) Microsoft Corporation. All rights reserved.
>
>
> /tmp/backuppc/preusercmd.sh: line 13: at: command not found
> cmdSystemOrEval: finished: got output Unknown parameter encountered:
> "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Microsoft (R) Windows Script Host Version 5.7
> Copyright (C) Microsoft Corporation. All rights reserved.
>
>
> /tmp/backuppc/preusercmd.sh: line 13: at: command not found
>
> full backup started for directory C (baseline backup #3)
> started full dump, share=C
> Connected to a.b.c.d:873, remote version 30
> Negotiated protocol version 28
> Error connecting to module C at a.b.c.d:873: auth failed on module C
> Executing DumpPostUserCmd: /tmp/backuppc/postusercmd.sh a.b.c.d 0
> cmdSystemOrEval: about to system /tmp/backuppc/postusercmd.sh a.b.c.d 0
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Rsync and shadow copy unloaded
> cmdSystemOrEval: finished: got output Unknown parameter encountered:
> "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Unknown parameter encountered: "valid users"
> Ignoring unknown parameter "valid users"
> Unknown parameter encountered: "public"
> Ignoring unknown parameter "public"
> Unknown parameter encountered: "writable"
> Ignoring unknown parameter "writable"
> Rsync and shadow copy unloaded
>
> Got fatal error during xfer (auth failed on module C)
> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d
> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d
> PING a.b.c.d (1.2.3.4) 56(84) bytes of data.
> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=0.376 ms
>
> --- a.b.c.d ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> rtt min/avg/max/mdev = 0.376/0.376/0.376/0.000 ms
> Previous state preserved: ON
>
> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d
> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d
> PING a.b.c.d (1.2.3.4) 56(84) bytes of data.
> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=2.75 ms
>
> --- a.b.c.d ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> rtt min/avg/max/mdev = 2.753/2.753/2.753/0.000 ms
> Previous state preserved: ON
>
> CheckHostAlive: returning 2.753
> Backup aborted (auth failed on module C)
> Not saving this as a partial backup since it has fewer files than the
> prior one (got 0 and 0 files versus 0)
> dump failed: auth failed on module C
>

----------
Looks like I found a way to progress. I noticed other settings in
BackupPc web interface for windowx xp box and I found
'RsyncAuthRequired' was checked but RsyncdUserName and RsyncdPasswd
were empty. Didn't realize I had to mention username and password
there. After editing those values and saving configuration, the
command line dump seems to be progressing.

ull backup started for directory C (baseline backup #3)
started full dump, share=C
Connected to host225.ent.iit.edu:873, remote version 30
Negotiated protocol version 28
Connected to module C
Sending args: --server --sender --numeric-ids --perms --owner --group
-D --links --hard-links --times --block-size=2048 --recursive
--specials --checksum-seed=32761 --ignore-times . .
Checksum caching enabled (checksumSeed = 32761)
Sent exclude: /Documents and Settings/*/Cookies
Sent exclude: /Documents and Settings/*/Local Settings/Temporary Internet Files
Sent exclude: /Documents and Settings/*/Local Settings/Temp ...so on..
----------


I do have ONE issue though, I am not sure why I get this message :

"
Ignoring unknown parameter "writable"
Microsoft (R) Windows Script Host Version 5.7
Copyright (C) Microsoft Corporation. All rights reserved.

/tmp/backuppc/preusercmd.sh: line 13: at: command not found " <-----at
is installed.

cat /tmp/backuppc/preusercmd.sh -->

#!/bin/bash
WINEXE=/usr/bin/winexe
#. /etc/backuppc/scripts/auth.sh
BOX=$1
$WINEXE --interactive=0 -U $UNAME -W $WRKGRP --password=$PWD //$BOX
'cmd /c c:\backuppc\pre-exec.cmd' <&-
pid=$!
# Wait 5 minutes
echo $pid
echo "sleep 300; kill $pid > /dev/null 2>&1" | at now
wait $pid &> /dev/null
if [ $? -ne 143 ]; then
   exit 100
fi
sleep 5
echo "Rsync and shadow copy loaded"
exit 0
# kill $$
# That should kill us




-- 
upen,
emerge -uD life (Upgrade Life with dependencies)

------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_feb
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki:    http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/